Home >> Fire Alarm Cables
Fire Alarm Cable Suppliers
We are offering supreme quality as Fire Alarm Cables Supplier that are specially designed for wiring of fire systems, fire protective circuits, burglar alarms, smoke detectors and voice communications. These Fire Alarm Cables comprise of high-temperature electrical wire and are temperature rated up to 90 degrees Celsius. Our Fire Alarm Cables are manufactured under the international parameters and stringently tested by our team of engineers.
Our company has established itself as a leading name of superior quality Fire Alarm Cables. We take due care that ends are not rough and don’t have any sharp edges, to make sure the wires are not damaged while installing. These are mainly used for connecting batteries in the auto industry and Inverter batteries. These are made available to the customers at industry leading rates and as per the set industry standards.
Application
These cables are used in high rise buildings, commercial complexes, schools and educational institutions, hospitals, etc. for the connection with security systems like smoke detectors, emergency lightings, exit signboards and fire command centre. These cables are used where the fire safety is utmost important.
Standard
BS 7629-1, BS EN 50200.
Technical Data
- Voltage Rating : 300/500V
- Temperature Range : -30°C to + 70°C (The cable should not be flexed when either the ambient or cable temperature is below 0°C)
- Minimum Bending Radius : 6D
Cable Type - 1
FFX200 05mSOZ1-R – CU/MGT/SR/OSCR/LSZH 300/500V Class 2
Cable Construction
- Plain annealed copper conductor to BS EN 60228, class 2.
- Primary insulation of glass mica fire resistant tape.
- Secondary insulation of high performance silicone rubber.
- E I 2 to BS 7655 Section 1.1.
- Core colours :
2 Core : blue, brown.
3 Core : blue, brown, black.
4 Core : blue, brown, black, grey.
- Glass fiber tape.
- Earth/Drain wire of annealed tinned copper to BS EN 60228.
- Electrostatic screen of aluminium fire barrier.
- Sheath type LTS3 to BS 7655 section 6.1.
Properties
Low smoke zero halogen (LSZH), flame retardant.
Fire Performance Tests
- BS 7629 – 1, 300 / 500 V fire resistant electric cables with non corrosive gases and low emission of smoke when affected by fire.
- Category STANDARD 30 & STANDARD 60 when tested in accordance with BS EN 50200-Method of test for resistance to fire of unprotected small cables for use in emergency circuits.
- Also meets category ENHANCED 120 when tested in accordance with BS EN 50200 and the 120 min survival time when tested in accordance with BS 8434-2.
- Meets requirement for fire resistant cables as described in clause 26 2e of BS 5839-1.
